Tile Roof Ridge and Hip Repair

Tile Roof Ridge and Hip Repair in Edison, New Jersey

Tile Roof Ridge and Hip Repair in Edison, New Jersey is what we do every week. If your ridge tiles are cracked, slipped or leaking, we diagnose the damage, match your existing clay or concrete tiles, and secure the ridge line before water reaches your underlayment. We serve homeowners across Edison and nearby towns with same-day estimates and workmanship you can inspect.

5.0Customer ratingTile Roof Ridge and Hip Repair
11Experienced teamTile Roof Ridge and Hip Repair
Prepared serviceClear plan before work
Direct supportOne local contact

Service overview

Tile Roof Ridge and Hip Repair in Edison, New Jersey

Tile Roof Ridge and Hip Repair in Edison, New Jersey means rebuilding the most vulnerable part of your roof: the ridge line where two slopes meet and the hips where they turn. Ridge tiles take the full force of wind, rain and freeze-thaw cycles. We remove broken or slipped ridge tiles, inspect the underlayment and flashing beneath, replace rusted fasteners, and re-bed or mechanically fix new ridge tiles with proper mortar or foam adhesive. Every repair is matched to your existing tile profile so the finished ridge looks original.

Edison homeowners call us most often after nor'easters, ice dams or when a ceiling stain appears near a valley. Clay and concrete tiles are tough, but the ridge mortar fails first. Once that mortar cracks, wind gets under the tiles and they slip. We fix tile roof ridge and hips in Edison before small gaps become full leaks. If you need tile roof ridge and hip repair near me Edison, our crew is based here and knows the housing stock from Clara Barton to Menlo Park.

Quality Tile Roof Ridge and Hip Repair in Edison

Practical benefits

Why Repair Ridge and Hip Tiles Now

Ridge and hip damage rarely stays small. A slipped tile exposes fasteners and underlayment to rain, and one freeze-thaw cycle can turn a hairline crack into a leak that stains your ceiling. Fixing the ridge early protects the whole roof system.

01

Stop Leaks at the Source

Ridge and hip leaks are sneaky because water travels along the framing before it shows up inside. We seal the ridge with new underlayment, copper flashing and roofing sealant so water never gets a path in. Most ridge leak repairs take two to four hours and stop the stain from spreading.

02

Prevent Tile Blow-Offs

Once ridge mortar cracks, high winds lift tiles and send them into your yard or a neighbor's. We re-secure every ridge tile with tile fasteners and approved adhesive. After a nor'easter, we often find 6 to 12 loose ridge tiles on one roof. Catching them early saves the rest of the run.

03

Match Your Existing Tiles

We stock and source ridge tiles from Ludowici, Boral, Eagle Roofing and Westile so your repair blends in. If your profile is discontinued, we fabricate a match or use a close-profile tile and color-match the mortar. You get a ridge that looks original, not patched.

04

Extend Roof Life by Years

A ridge repair done right adds years to a tile roof. We replace failed underlayment, upgrade to copper flashing where needed, and clear moss growth that holds moisture against the tiles. Homeowners in Edison often get another 10 to 15 years from a roof that was leaking at the ridge.

How service works

Our Ridge and Hip Repair Process

We keep the process simple and transparent. You get a clear scope, a fixed price, and a crew that cleans up like it was never there. Here is exactly what happens from your first call to final walkthrough.

STEP 01

Inspection and Estimate

We inspect the ridge and hips from the roof and from inside the attic when accessible. We check for cracked tiles, failed mortar, rusted fasteners and underlayment damage. You get a written estimate the same day, usually within two hours of the inspection. We explain what caused the damage and what we will do to fix it.

Tools and methods

Tools and Methods for Ridge and Hip Repair

01

Tile Roof Hammer

Used to remove ridge tiles without breaking them. The hammer has a special head that grips the tile and lifts it cleanly.

02

Tile Lifter

A flat bar designed to lift tiles without cracking them. We use it to free slipped tiles and check underlayment.

03

Pitch Hoist

Lifts heavy tile bundles onto the roof without damaging the roof or the tiles. It also reduces strain on our crew.

04

Roofing Nail Gun

Drives fasteners quickly and consistently. We use it for underlayment and battens, not for tile fasteners, which are hand-driven.

05

Chalk Line

Marks a straight line for ridge tile alignment. This ensures the ridge runs true and looks professional.

06

Magnetic Sweeper

Picks up nails and metal scraps from your lawn and driveway. We run it at the end of every day to keep your property safe.

07

Caulking Gun

Applies roofing sealant at penetrations and flashing edges. We use sealant approved for tile roofs.

08

Mechanical Fastening

We secure ridge tiles with corrosion-resistant screws and tile fasteners. This is more reliable than mortar alone, especially in high-wind areas. Mechanical fastening is the standard for modern tile roofs.

09

Mortar Bedding

For traditional clay and concrete tile roofs, we re-bed ridge tiles in mortar. We use a mortar mix designed for tile roofs that flexes with temperature changes. This method matches original construction.

10

Foam Adhesive

For some repairs, we use polyurethane foam adhesive. It bonds quickly and is flexible. Foam is a good choice when mortar would be too rigid or when the roof deck is uneven.

11

Copper Flashing

We install copper flashing at ridge and hip transitions. Copper lasts longer than aluminum and does not rust. It is the best choice for long-term leak protection.

Professional service tools

Where this service fits

When to Call for Ridge and Hip Repair

01

You see cracked or missing tiles on the ridge after a winter storm.

We inspect the ridge, replace cracked tiles and re-secure the ridge line. We also check the underlayment for damage. If we find a leak, we fix it in the same visit. Your ridge is restored and watertight. You avoid a ceiling leak and further tile damage.

02

You notice a ceiling stain near the ridge or hip after heavy rain.

We trace the leak to its source, which is usually failed underlayment or flashing. We repair the underlayment, flashing and ridge tiles. We test with water to confirm the leak is fixed. The leak stops and the stain does not grow. Your attic stays dry.

03

Your home inspection report flags ridge and hip damage before a sale.

We provide a detailed inspection and repair estimate. We fix the damage and provide documentation for the buyer. We can also coordinate with realtors and inspectors. The sale moves forward with a repaired roof and clear documentation.

04

You are planning to replace your roof and want the ridge done right.

We remove the old ridge tiles, replace the underlayment and flashing, and install new ridge tiles that match your field tiles. We use copper flashing and proper fasteners for a long-lasting repair. Your new ridge matches the roof and will last for decades.

Local execution

How We Handle Ridge and Hip Repair in Edison

Edison's climate is hard on tile roofs. We get freeze-thaw cycles from November through March, plus nor'easters that drive rain sideways. Ridge mortar cracks, tiles slip, and underlayment fails. We build repairs to handle these conditions. We also know the local housing stock: many homes in Edison Center, Clara Barton and Menlo Park have original clay or concrete tile roofs from the 1950s to 1980s. These roofs need careful matching and proper underlayment. We follow New Jersey building codes and Tile Roofing Industry Alliance standards. If you need same-day tile roof ridge and hip repair in Edison NJ, call us. We are based here and we know the local conditions.

01

Edison Center

Many older homes with original clay tile roofs. Ridge mortar is often original and needs replacement.

02

Clara Barton

Mix of concrete and clay tile roofs. We see ice dam damage at ridges after heavy snow.

03

Menlo Park

Larger homes with complex roof lines and multiple hips. Ridge and hip repairs are common after storms.

04

North Edison

Newer construction with concrete tile roofs. We repair ridge mortar that fails after 15 to 20 years.

05

Freeze-thaw cycles from November to March

Water seeps into hairline cracks in ridge mortar, freezes and expands. This widens cracks and loosens tiles. We use flexible mortar and proper flashing to handle expansion.

06

Nor'easters with high winds

Wind gets under loose ridge tiles and lifts them off. We mechanically fasten ridge tiles and replace missing ones after storms.

07

Summer heat and humidity

Heat can soften mortar and cause tiles to shift. We inspect ridges in summer and reseal as needed.

Problems we solve

Problems We Solve with Tile Roof Ridge and Hip Repair

Ridge and hip damage shows up in different ways. Some are obvious, like a missing tile. Others are hidden, like a slow leak that only appears during heavy rain. We solve all of them. If you are searching for how to fix cracked tile roof ridge and hips in Edison New Jersey, we can help.

01

Cracked ridge mortar and slipped tiles

We remove the cracked mortar, inspect the underlayment and re-bed the ridge tiles with new mortar or foam adhesive. We also replace any rusted fasteners. This restores the ridge and prevents further slipping. Water gets under the tiles, freezes and expands, causing more tiles to slip. Eventually the underlayment fails and you get a leak.

02

Leaks at the ridge or hip during heavy rain

We trace the leak to its source, which is often failed underlayment or flashing under the ridge tiles. We replace the underlayment, install new flashing and reseal the ridge. We test with water before we leave. Ceiling stains, attic mold and damaged insulation. A small leak can cost thousands in interior repairs if ignored.

03

Tiles blown off after a storm

We replace missing tiles and secure the remaining ridge tiles with new fasteners. If the storm damaged the underlayment, we replace that too. We also check the rest of the roof for damage. Missing tiles expose the underlayment to sun and rain. The next storm can cause more tiles to blow off, leading to widespread damage.

04

Moss growth on ridge and hips

We remove moss without damaging the tile surface and treat the area to slow regrowth. We also check for damage underneath. Moss removal is often combined with a ridge repair. Moss holds moisture against the tiles and mortar, speeding up deterioration. It also makes the roof slippery and unsafe to walk.

A practical standard for every visit.

Clear planningPrepared arrivalsCareful workLocal follow-through

Experience in the details

Edison Ridge and Hip Repair Expertise

We have been repairing tile roofs in Edison since 2015. Our crew includes NRCA Certified Roofing Contractors and we hold a New Jersey Home Improvement Contractor License. We are also a GAF Master Elite and CertainTeed SELECT ShingleMaster contractor, which means we meet strict installation standards. We have repaired hundreds of ridge and hip systems on clay, concrete and slate roof tiles across Middlesex County. We know how local freeze-thaw cycles attack ridge mortar and we build repairs to handle them.

  • 11 years serving Edison and Middlesex County with tile roof repairs
  • NRCA Certified Roofing Contractor with OSHA 10-Hour Construction Safety training
  • GAF Master Elite and CertainTeed SELECT ShingleMaster credentials
  • Tile Roofing Industry Alliance Member with access to current installation standards
  • EPA Lead-Safe Certified Firm for safe work on older homes
Dependable Tile Roof Replacement across Edison, New Jersey

Before the visit

Frequently Asked Questions

Still wondering?(732) 123 4567

Most ridge and hip repairs in Edison run $450 to $1,800 in 2026. Small repairs with a few tiles cost less; full ridge rebuilds with new underlayment and flashing cost more. The price depends on roof height, tile type, access and how much damage is hidden under the tiles. We give you a fixed price after inspection, so you know the cost before we start.

Ridge mortar cracks from freeze-thaw cycles, which Edison gets every winter. Water seeps into hairline cracks, freezes, expands and pushes the mortar apart. After a few seasons, tiles slip. High winds from nor'easters also work the ridge loose. Once mortar fails, the ridge tiles are held only by gravity and a few fasteners. We replace the mortar and secure the tiles properly.

Most ridge repairs take one to two days. A small repair with 5 to 10 tiles takes two to four hours. A full ridge rebuild on a 2,000-square-foot home takes two days. We schedule around weather and give you a start date and finish date. If rain is coming, we tarp the open ridge overnight to keep your home dry.

We do. Edison Tile Roof Replacement has been repairing tile roofs here since 2015. We are licensed, insured and carry NRCA and GAF Master Elite credentials. We handle clay, concrete and slate roof tiles. Call us at (732) 123 4567 for a same-day estimate. We serve Edison and nearby towns like Metuchen, Highland Park and Woodbridge.

Keep exploring

Related Services

Your next step is waiting

Get Your Tile Roof Ridge and Hip Repair in Edison, New Jersey

Don't wait for a small ridge crack to become a ceiling leak. We offer same-day estimates and 24/7 emergency service for tile roof ridge and hip repair in Edison, New Jersey. Call now and we will inspect your ridge, give you a fixed price and schedule the repair. Licensed, insured and warrantied.

Start with the basics

Get a Free Tile Roof Estimate

Call us at (732) 123 4567 or send a message and we will get back to you the same business day. We answer the phone 24/7 for emergency calls, and we schedule standard estimates within 24 hours. Tell us what your roof is doing and we will tell you what it needs.

Need service?Call now